Nokia N95 SIP Settings for voip setup

Now you can enjoy crystal-clear phone calls over the Internet using the new Nokia N95 phones. If you have access to a WiFi or 3G connection, you can save money by using the Internet to connect your call instead of using your mobile phone minutes. No roaming or out-of-network fees. Make your calls from anywhere in the world to anywhere for just a few pennies a minute. Simple to configure, inexpensive to use.

SIP Configuration Application

Nokia has a new application to configure the preferred codec, NAT settings, STUN, VoIP over 3G, etc. for Nokia N and E Series mobile phones.

Download application here

User manual available here

Manual Configuration

Here you can find Nokia N95 SIP settings for voip setup configuration guide with Fonosip.com service.

STEP 1

Go to Tools / Settings / Connection / SIP settings. Create the following profile

Profile Name: FonoSIP.com

Profile: IETF Default

Access point: (your WLAN AP name)

Public user name: 812345@fonosip.com ( Instead of 812345 account number example, use the account number assigned to you when signed up for FonoSIP.com service. When recorded your phone will show sip:812345@fonosip.com )

Use Compression: No

Registration: "Always on "

Use Security: No

STEP 2

You do not need to enter Proxy Server settings

Proxy Server Address: none

Registrar Server:none

Realm: none

User Name: none

STEP 3

Enter the following for Registrar Server settings

Registrar Server: fonosip.com (When recorded your phone will show sip:812345@fonosip.com)

Realm: fonosip.com

User Name: 812345 (Instead of 812345 account number example, use the account number assigned to you when signed up for FonoSIP.com service. )

Password: Enter the password that you chose when you signed up for the service.

Transport Type: UDP

Port: 5060

STEP 4

Go to connection / Internet Tel. Settings

Create a new profile for "fonosip"(812345), name it "fonosip"

In Connectivity / Internet tel. / Preferred profile

Choose "fonosip"

STEP 5

Reboot your phone. Once your phone is back on it will automatically register to FonoSIP.com.

Once it is registered you can start making calls.

Default call type: To switch between normal GSM calls or VOIP calls, navigate to Tools / Settings / Call / Default call type. Select Cellular to make normal calls to the phone number or Internet to use VoIP to call the number or address

Make Calls!

To dial any phone number that is part of the NANP (North American Numbering Plan), you must dial:

1 + Area Code + Phone number

To dial any phone number that is outside of the NANP (North American Numbering Plan), you must dial:

00 + Country Code + City Code + Phone number

For example if you want to call Brazil (country code 55) phone number in Rio de Janeiro (city code 21) you must dial 00-55-21-phone number.